Anti Slip Protection Company presents the Anti-Slip, Non-Slip coating for marble floor and Anti-Slip, Non-Slip treatment for ceramic tile.

http://youtu.be/5K0pVy_GPEs

Product # 1 –Anti-Slip, Non-Slip Coating, Anti-Slip, Non-Slip Sealer.

* Slip-resistant impregnator

*Water-resistant impregnator

*Stain-resistant impregnator

Designed and effective for: polished marble, granite, delicate decorative very shiny ceramic tiles, shiny white porcelain, fiberglass bathtub, fiberglass shower pan, and vinyl floor. This Anti-Slip Sealer will not change the color or appearance of the marble floor. Application product #1: use directly from the bottle, apply with a clean white towel, paintbrush or roller.  Keep the surface wet for penetration time of 3-5 minutes and remove surplus product before dry with a clean white towel (cotton), or baffling machine. If the sealer dries on the surface, reapply again # 01 and wipe it immediate. For better slip resistant I recommend a second coat for some surfaces. Complete the drying time in between 12 to 24 hours. Floor should be clean and dry before using this anti-slip, non-slip product. The anti-slip sealer increases slip resistant up to 80% and prevent slipping on marble, or vinyl floor.

Product # 2 – Etching, Anti-Slip, Non-slip solution for slippery tile floor, and tile treatment.

Designed and effective for: slippery ceramic tile, all kinds tile floor, porcelain tile, concrete floor, terrazzo floor, travertine marble, quarry tile, glazed bathtub, shower pan, swimming pool deck, hallways, entranceways, slippery bathroom floors, slippery kitchen floors, …

Way concentrate:

Slippery ceramic tile, porcelain tile and concrete have different textures, hard surfaces, and many of them need a different anti-slip tile treatment for slip resistance. The best solution is if you send me a sample of your material and I will decide what mixture will be the best for your slippery floor. If you do not have a sample, you have to mix the concentrate with no less than ¾ gallon of water and no more than 1 (one) gallon per 8oz bottle of concentrate, to get the average slip resistance, 0.60 Static Coefficient of Fraction, or more. Please always test a small area first, before you apply the non-slip product all over.

Application: mix 8 Oz. concentrate anti-slip, non-slip product #2 with no less than ¾ gallon of water and no more than one (1) gallon per 8 oz. bottle of concentrate Non Slip Floor Treatment.

Apply mixed solution with a clean mop to agitate the anti-slip, non-slip product.

Application time is 10-15 minutes. Keep evenly wet adding additional Non-Slip solution, if necessary.

Rinse with water hose, if there are no floor drains, residue must be picked up with dry mop, sponge, or wet vacuum. This is one of the best solutions for slippery floor to increase slip resistant.

For consultation & more information please contact our representative at: 310-428-2395

Anti Slip Protection the tile treatment for slip resistant.

Anti slip floor solution.

www.antislipprotection.com